Adhesive Label_Sticker Rolls

Product Details:

Label India is instrumental in offering variety of Plain / Blank Label.

The offered range is manufactured in strict adherence with high industry standards and norms.

These labels are available in varied sizes and shapes. (sheet, roll and fanfold format).

Chromo Paper Labels

Product Details:

Labels that Stand Up to Extreme Cold, Even Liquid Nitrogen
The strong, permanent adhesive on these labels withstands cold storage temperatures and maintains adhesion to glass, plastic, cardboard and more, even in liquid nitrogen.
Organize and label samples for short or long-term cold storage
Ideal for environments down to -196??C
Dot and rectangle shaped labels sized for 0.5 to 2.0ml cryogenic tubes
67 x 25mm (2.6 x 1.0”) rectangle for large tube, cryo box and rack labeling
Overall thickness of the coated label is 2 mil

Use with non-water soluble printer inks and markers/pens or with Wet Surface Pen Autoclavable at 121°C (250°F).

Being able to identify samples is critical—without an identity a sample loses all integrity. Loss of sample integrity can lead to waste in several forms: physical waste if that sample becomes unusable, wasted time in the form of workflow interruptions and wasted budget if the sample was valuable.

When samples go into cryogenic storage, their integrity is especially at risk. The extreme temperatures and frost take quite a toll on the average label, which is where cryogenic labels come in handy. 

What are Cryo-labels?

Cryo or cryogenic labels are labels that have been specially engineered to withstand cryogenic conditions. The face material and adhesive are created and paired specifically to remain intact when stored under extremely cold temperatures for an extended period of time.

If your lab is storing samples under cryogenic conditions it’s incredibly important cryo-labels are being used since they were engineered specifically for that purpose. When labels that aren’t engineered for purpose are used you risk labels falling off the container, ultimately leading to a loss of sample integrity.

Additionally, you’ll need to consider which stage(s) of cryo storage your samples will be undergoing. There are multiple stages:

• deep freeze which can go as low as -80 C
• vapor phase which can be as low as -120 C
• liquid nitrogen storage which can reach temperatures as low as -196 C.

Most cryo labels are engineered with a specific cryo storage stage in mind, so you’ll want to ensure you’re choosing labels that can withstand your storage temperatures.

Why are Labels Important for Cryogenic Storage?

In the healthcare field, the goal is always to help the patient. Whether that be through the development of a new treatment, or giving them a diagnosis so they can take the right course of action. Patients look to healthcare professionals for answers, and they expect accuracy.

 

Labels provide biological samples with an identity so they can be tracked through processing. Without accurate sample identification, results become meaningless as no test history or patient information can be attached to the sample. Typically, when samples lose their labels at any point during processing they end up going to waste, and depending on the value of the sample, a loss can cost a lot more than time and supplies.

Product Details:

Cryogenic Labels offer adhesive that is designed to withstand extreme cold temperatures from -196° C (-311°F). 

Labels can be printed on and will not bleed. Offered in an array of sizes and colors on rolls.

The offered Cryogenic labels are designed to adhere to frozen surfaces like frozen vials and tubes.

For cryo-preservation in liquid nitrogen or lab freezers.

Intended uses of cryostorage with liquid nitrogen, refrigeration and ultra-low temperature freezer applications.

Features

• Waterproof plastic
• Resistant to alcohol
• Resistant to multiple freeze-thaw cycles
• Extra-permanent adhesive
• Temperature range from -196°C to +110°C
• Will stick to wet surfaces
• Rounded Corners
• Compatible with most thermal-transfer printers
• No cure time
• Can be submerged in liquid nitrogen immediately

Temperature Range

Product Details:

Prevent tampering and label swapping with destructible and void patterned security labels.

After applying, these labels become impossible to remove cleanly, leaving behind adhesive or material that indicates clear intrusion.

Durable solution for indoor and outdoor applications. Our security labels are made-to-order in custom ...barcoded or simple text prints or blanks, all in customizable sizes and shapes.

Customers love using security labels for:

• Warranty and “VOID If Removed” labels
• Government property and assets
• Medical and pharmaceutical tracking
• Computers, A/V equipment

Product Details:

Special Labels that last when put on Oily Surfaces....
This type of label uses a specially formulated adhesive, which is able to maintain the bond even when there is oil or grease present....

Adheres to oily surfaces such as steel sheets and other substrates that previously would need to be cleaned before application. Ideal for steel, automobile components, and other industrial identification labels, and for general labelling of foods and cosmetics.
Features

• Oil absorption by the adhesive provides good adherence, even to oily surfaces.
• Directly applicable to oily surfaces, which improves process efficiency by eliminating surface cleaning processes.
• Printable with conventional ink and/or thermal transfer ribbons.

Product Details:

• We make the Labels for the VIP Inkjet Roll Label Printer..... 

We have ready Raw Material Stock for :

• Glossy Paper Label
• Glossy PP White Label

We can offer Continuous or Pre Die Cut Labels well compatible to the Pritner.....

Continuous Roll

???
When using constant label rolls, you can use the cutter to Cut the desired label length. Consequently, if you use the 4" x 100 feet continuous roll, you can print 4×1, 4×2, 4×6, or 4×12 labels, as required for your business. The only difference between the die cut and the continuous roll labels is that they will have square corners.

Die Cut Rolls

"Die Cut" usually means that the label is cut out with a "cookie cutter" to create the shape you want the label to be. Die cut may mean your label or label will have rounded corners as opposed to square corners (which are often called "butt" or"kiss" cut). One benefit of die cut is that, typically, the label is easier to apply. Our Die Cut labels are in an assortment of different sizes for all your label needs -- Circle, Ovals, Square and Rectangle.

UP Labels

Labels are also categorized by the number of tags across The width of the roll. 1 up labels take up the full width of the roll. 2 up Labels are labels that pay half the width of the roll, while 3 up labels Take up a third of the roster and have three labels across the roll.

Product Details:

• We make the Labels for the EPSON Inkjet Roll Label Printer..... 

We have ready Raw Material Stock for :

• Glossy Paper Label
• Glossy PP White Label

We can offer Continuous or Pre Die Cut Labels well compatible to the Pritner.....

Continuous Roll

???
When using constant label rolls, you can use the cutter to Cut the desired label length. Consequently, if you use the 4" x 100 feet continuous roll, you can print 4×1, 4×2, 4×6, or 4×12 labels, as required for your business. The only difference between the die cut and the continuous roll labels is that they will have square corners.

Die Cut Rolls

"Die Cut" usually means that the label is cut out with a "cookie cutter" to create the shape you want the label to be. Die cut may mean your label or label will have rounded corners as opposed to square corners (which are often called "butt" or"kiss" cut). One benefit of die cut is that, typically, the label is easier to apply. Our Die Cut labels are in an assortment of different sizes for all your label needs -- Circle, Ovals, Square and Rectangle.

UP Labels

Labels are also categorized by the number of tags across The width of the roll. 1 up labels take up the full width of the roll. 2 up Labels are labels that pay half the width of the roll, while 3 up labels Take up a third of the roster and have three labels across the roll.

Product Details:

• We make the Labels for the EPSON Inkjet Roll Label Printer..... 

We have ready Raw Material Stock for :

• Glossy Paper Label
• Glossy PP White Label

We can offer Continuous or Pre Die Cut Labels well compatible to the Pritner.....  

Continuous Roll

​
When using constant label rolls, you can use the cutter to Cut the desired label length. Consequently, if you use the 4" x 100 feet continuous roll, you can print 4×1, 4×2, 4×6, or 4×12 labels, as required for your business. The only difference between the die cut and the continuous roll labels is that they will have square corners.

Die Cut Rolls

"Die Cut" usually means that the label is cut out with a "cookie cutter" to create the shape you want the label to be. Die cut may mean your label or label will have rounded corners as opposed to square corners (which are often called "butt" or"kiss" cut). One benefit of die cut is that, typically, the label is easier to apply. Our Die Cut labels are in an assortment of different sizes for all your label needs -- Circle, Ovals, Square and Rectangle.

UP Labels

Labels are also categorized by the number of tags across The width of the roll. 1 up labels take up the full width of the roll. 2 up Labels are labels that pay half the width of the roll, while 3 up labels Take up a third of the roster and have three labels across the roll.

Product Details:

• We make the Labels for the AFINIA Inkjet Roll Label Printer..... 

We have ready Raw Material Stock for :

• Glossy Paper Label
• Glossy PP White Label

We can offer Continuous or Pre Die Cut Labels well compatible to the Pritner.....

Continuous Roll

???
When using constant label rolls, you can use the cutter to Cut the desired label length. Consequently, if you use the 4" x 100 feet continuous roll, you can print 4×1, 4×2, 4×6, or 4×12 labels, as required for your business. The only difference between the die cut and the continuous roll labels is that they will have square corners.

Die Cut Rolls

"Die Cut" usually means that the label is cut out with a "cookie cutter" to create the shape you want the label to be. Die cut may mean your label or label will have rounded corners as opposed to square corners (which are often called "butt" or"kiss" cut). One benefit of die cut is that, typically, the label is easier to apply. Our Die Cut labels are in an assortment of different sizes for all your label needs -- Circle, Ovals, Square and Rectangle.

UP Labels

Labels are also categorized by the number of tags across The width of the roll. 1 up labels take up the full width of the roll. 2 up Labels are labels that pay half the width of the roll, while 3 up labels Take up a third of the roster and have three labels across the roll.

Product Details:

We manufactures customized cryogenic labels used in the fields of virology, genetics, DNA sequencing, drug discovery, forensics and related laboratory sciences. It handles cryogenic temperatures and adheres to a variety of vials, test tubes and plates.

Our cryogenic labels:

 Adhere to silicone coatings on plastic and glass vials
 Stick well around the curve of tight diameter vials
 Allow the contents of a vial to remain visible (available in very small sizes)
 Resist moisture through repeated freeze and thaw cycles

 Fit small side walls on microwell, micro assay and Microtiter® plates
 Can be printed in color, custom thermal transfer printing
 Are available in blanks, which you can print onsite

Product Details:

Direct thermal film label used for multitude of applications like Information labeling (airport baggage tags etc.), manufacturing tracking, weight and price labeling.

The film has a proprietary coating which enables image/impression formation upon contact with the print head of the thermal printer.

A protective layer is generally applied to protect the coated surface from mechanical abrasion, climatic factors, chemical products etc. The film thus offers good scuff & water resistance. The film also lends an excellent paper like matte finish and produces a dark image on printing.

The direct thermal printing method generally used for short term indoor use is being extensively used because of its ease of use, low cost and tamper proof nature. Some of the advantages are explained below. Moreover, the film is becoming increasingly popular substrate vis-a-vis paper for this printing type because of its non-tear ability.

Ease of Use: Anyone can print direct thermal labels. Simply place the label stock into your printer and print. There’s no costly equipment to maintain, troubleshoot or fix.

 Lower Cost: Direct thermal printing (DTP) is cost – effective, with a comparable cost of ownership (TCO) to thermal transfer.

Temper proof: With sensitive data imaged directly onto the BOPP DTP film, there are no data-filled ribbons to dispose of. Information is released only upon printing, protecting the privacy and primacy of sensitive information.

Reduced Inventory: Direct thermal printing labels do not use ribbons, inks or toners, allowing companies to order only the label stocks they need for their initiatives. Simplified ordering and product requirements save inventory and label costs – as well as valuable warehouse space.

Product Details:

We are well known within the industry for manufacturing standard quality Direct Thermal Labels.

Suitable for all kinds of weather, these labels are made available in different sizes.

It is available in Paper / Non Tearable Film as well....

Our Direct Thermal Products all have a heat sensitive coating on the face stock which enables these products to be imaged with a barcode printer and does not require a ribbon.

Our product offering includes various face stocks from paper to BOPP film. These products cover a wide range of applications and can be manufactured with a multitude of adhesives to meet our customers’ requirements. 

Non Top Coated Paper – Our Economy Paper labels utilize a paper base stock to which a thermal coating has been applied. 

Top Coated Paper – Our Premium Paper labels are smooth, bright, white paper with a high sensitivity thermal coating. 

Direct Thermal BOPP Film – A durable, high sensitivity, 3 mil direct thermal polypropylene film (BOPP) for use with high speed thermal printers.

Product Details:

Label India provides a solution to secure your assets and property with our Asset tags/ Labels which are personalized. 

Selected from Material options for almost any environment.

Our most popular asset labels are great for tagging just about anything, suitable for indoor and outdoor applications, and resistant to excessive temperature, sunlight, and chemical exposure.

Product Details:

Having the diverse requirements of our clients, we are involved in presenting an exceptional range of Pharma Product Labels.

These Labels are manufactured in strict adherence with set market quality standards and norms. 

You aim to deliver products that provide health benefits to consumers. With quality label materials, value-added label solutions and clear label design, we help you communicate your products’ benefits and gain your customers’ trust with custom pharmaceutical and medical labels.

We manufacture labels specially for Pharmaceutical Labels – self adhesive label rolls for Ampoule, vial and bottle Self adhesive label rolls supply to Syrup bottle , Oral Liquid bottle , Dry powder vials, suspension bottle labels and Labeling Pharmaceutical and Healthcare Products , Nutraceuticals Labels for bottle and Jar nutrition ,Protein Powder Jar labels....

Product Details:

Label India servers to the diverse requirements of its clients.

We are involved in presenting an exceptional range of Batch Labels.

These Labels are manufactured in strict adherence with set market quality standards and norms.

Product Details:

Heat and solvent resistant labels for full traceability of your PCBs

Printed circuit boards and other high heat production processes place special demands on barcode labels. Our polyimide (Kapton®) and other durable, yet cost-effective labels will withstand all rigorous manufacturing processes including soldering, galvanization, and cleaning, ranging as high as 1000°F (537°C) for some of our materials.

We understand how important labels are for tracking and traceability of PCBs in the electronic production processes. It is essential that your PCB is fully tracked from end-to-end so that you can be certain that each one has completed the full manufacture cycle. To do this your labels have to withstand extreme temperatures (up to +388ºC), chemicals and handling, all while maintaining high levels of readability throughout.

 

Label failure means that your PCB boards cannot be traced throughout production, leaving uncertainty over the validity of manufacture. This results in potential time delays and extra cost when a PCB batch has to be discarded and re-produced.

Minimise the risk of downtime and costs and ensure you have full manufacture traceability by getting the right PCB Label for you and your specific application.

Our labels are ideal for use on printed circuit boards:

• Full end-to-end manufacture traceability.

• Temperature resistant from -40ºC to +388ºC, to support all electronic production processes.

• Hard-wearing and able to withstand chemicals, wave solder, infrared ovens and deionised water, ultrasonic cleaning & detergents.

• Special surface coating to ensure sharp printing even at the smallest size, perfect for highly readable barcodes.

 

• Fully computer printable by you using a thermal transfer desktop label printer.

Product Details:

We offer a superior quality range of Self Adhesive Barcode Labels / Stickers.

The offered barcode labels are manufactured with great perfection by with the help of latest machinery & finest material.

Marerial :

• Chromo Paper Labels
• Polyester Labels
• PP Labels

100% Scannable

Barcode Verification Report is possible

Product Details:

Label India is recognized as the industry leaders by developing finest grade Barcode Labels.

In addition to this, we are providing sequentially numbers barcode labels and tags that are suitable for tracking products during the manufacturing process.

Made from premium grade material the finely finished labels and tags can be ordered from us in customized sizes at a leading price.

Product Details:

Label India work with the Latest Technologies and Equipment to have a better output and error free results.

We can make Labels with Paper / PP / Polyester Label Materials....

It can be Printed or Plain Labels.....
 
Various Label Applications:

• Product Identification
• Shipping
• Food Processing
• Inventory
• Luggage
• Garment & Apparels etc.

Product Details:

Polyimide KAPTON® Circuit Board Labels and labeling solutions for printed circuit board manufacturing processes & other extreme heat & harsh environments where your barcode label must survive. All
Polyimide Kapton® Labels are lead-free ( Pb free labels ) & meet RoHS standards.

Characteristics Of Polyimide Kapton® LabelsCircuit Board Labels made of Kapton® polyimide film and offer the following advantages:

• Lead – Free (Pb Free labels)
• Superior hydrolytic and chemical resistance
• Can endure cryogenic storage and harsh environments without over-lamination

It is designed for barcode or alphanumeric identification of printed circuit boards, or related electronic components. It is the ideal label to withstand surface mount board processes, on either the top or bottom side of the board. It can also be used on the top side of the board in mixed processes, and is recommended for the bottom side which is directly exposed to the wave solder environment. When matched with right ribbon this material/ribbon combination passes the requirements of MIL-STD-202G, Notice 12, Method 215K and MIL-STD-883E, Notice 4, Method 2015.13

Product Details:

Repositionable labels are a great way to make it stick again, and again.

This versatile and durable material is available in both paper and gloss material.

Stick these labels to any smooth surface, then peel them up and reposition whenever you choose!

Repositionable labels are ideal for use over and over again. .

The special adhesive allows the material to be peeled up and the re-stuck multiple times without losing any stickiness.

This makes these labels perfect for a variety of uses like sticking signs or labels to public property, use for short term signage, product labelling, use on tablets and smartphones, windows and more!

Product Details:

We are prominent manufacturer of Jewellery Labels / Tags that are manufactured using plastic films.

These are popular among various Jewellery Stores & Manufacturers.

These are highly durable and comprises of long lasting adhesive.

It is water proof, stain resistant and made available in market leading prices.

Product Details:

We are involved in manufacturing supreme quality Identification Labels, These labels are widely used by various industries, government offices and consumer markets. 

Product Details:

We are actively engaged in manufacturing an excellent range of Gloss White Polyester Labels.

Owing to its quality, the offered white polyester labels are broadly commended by our customers. Our offered white polyester labels are manufactured under the direction of talented personnel with the use of finest material & modern machinery. As per the customers requirements, we provide the whole range in assorted stipulations.

Product Details:

Occupied a large volume of industry expertise; we offer a distinguished array of Fluorescent Labels.

The offered fluorescent label finds its usage in various applications in assorted industries. We use only top notch material & latest machinery during manufacturing the offered array. The offered fluorescent label is widely acceptable by our honored customers for featuring assorted attributes like optimum quality.

Product Details:

Label India provide a range of Cargo / GHS Labels be whatever its size and shape.

We have the right solution for all your labelling requirements.

We are able to print a range of packaging labels with various designs as per the customer requirement.

All shipped hazardous chemical containers must be labeled with a signal word, pictogram, hazard statement, and a precautionary statement for each hazard class and category.

These requirements impact chemical manufacturers, importers, and distributors...........

Product Details:

Polyester Asset Tags, an economical alternative to aluminum tags, polyester asset tags perform best in moderate environments.

Polyester asset tags deliver flexible, long-lasting protection.

Extreme durability and exceptional performance in even the most difficult environments. Versatile Polyester Labels provide excellent durability for a wide variety of environments. Polyester Labels are available in virtually any size or shape. The low profile 2 mil (0.002" thick) polyester material is backed with an exceptional multi-purpose permanent pressure sensitive acrylic adhesive that secures these premium labels for permanent attachment and extended service life.

Durable Polyester Labels

• Digitally printed and overlaminated with clear protective poly overcoat for added resistance to effects of abrasion and UV (sunlight) exposure.
• Barcoded with any symbology or traditional human readable number sequence only.
• With your company logo if desired.

Most Popular and Cost-Effective Solution to Protect and Manage Your Assets
Polyester Asset Labels consist of 2.0 mil gloss white polyester face stock, top laminated with a 1.0 mil clear polyester film. The 0.8 mil multi-purpose permanent pressure-sensitive adhesive provides high initial tack, and bonds to high- and low-surface energy plastics, lightly textured or contoured surfaces.

Product Details:

Our labels are well-suited for long-term storage in liquid nitrogen (-196°C), lab freezers, and dry ice transport.

These labels are waterproof, can be immersed in liquid nitrogen directly following application, and can withstand multiple freeze-thaw cycles.

These cryogenic-compatible labels feature an extra-permanent adhesive for secure biopreservation of samples.

They were designed for long-term biopreservation under cryogenic laboratory conditions, including helium, liquid and vapor phase liquid nitrogen, freezers, and dry ice transportation.

They are ideal for identifying cryo boxes, vials, tubes, plastic bags, plates, etc.

Features

• Waterproof plastic
• Resistant to alcohol
• Resistant to multiple freeze-thaw cycles
• Extra-permanent adhesive
• Temperature range from -196°C to +110°C
• Will stick to wet surfaces
• Rounded Corners
• Compatible with most thermal-transfer printers
• No cure time
• Can be submerged in liquid nitrogen immediately

Temperature Range

Product Details:

Cold Temperature labels are moisture resistant, freezer-safe and have a working temperature range of -65°F to 200°F. Cold Temperature labels have a strong, permanent adhesive specifically designed to withstand temperatures below freezing.

Cold temperature labels are designed for freezer applications, such as frozen containers or containers that will be submerged in ice. They are also great for disposable containers, plastic wrap, and foil.

Polypropylene is one of many materials used to create cold resistant labels

Cold resistant labels are the best option when a vial or container will be exposed to or stored in a low temperature environment including those below freezing.

The design resists moisture, solvents, and other conditions common in laboratory environments or other less common storage scenarios. 

Unique materials in the design safeguard the storage vessel in temperatures surpassing below freezing. These materials are able to withstand exposure to items such as organic solvents. Cold resistant labels adhere to multiple surfaces including plastics, glass, and metals. Polypropylene labels are a synthetic thermal transfer product with the following traits:

• High Printing Quality
• Reduced Degradation (Tearing, Scuffing, etc.)
• Exceptional Moisture Resistance
• Withstands Lower Temperatures

Product Details:

Label Sheets for Laser Printers : 

Laser labels can make your life much easier if your printing labels at the office or home. Create mass mailers or label boxes. products, drums, and more.

We offer many labels specifically designed for laser printers that are suitable for your use. If high-speed printing and volume is the issue, then blank laser printer labels are the answer, and will help get your job done quickly and efficiently!

Our label sheets will work well with all HP, Canon, Ricoh, Brothers, Xerox, Lexmark, Samsung, Dell, and all common brand laser printers.

Additional Information:

• Delivery Time: 2 to 3 working days
• Packaging Details: per Pkt. of 100 Sheets

Product Details:

Aluminium Tags are the ideal asset barcode label or fixed asset tag type for marking and tracking your assets.

These aluminium labels are extremely strong, long lasting, easy to apply and virtually impossible to remove.

They come in many sizes and can be printed from 1 Colour (Black on Aluminium)

Fixed assets management is an accounting process that seeks to track fixed assets for the purposes of financial accounting, preventive maintenance, and theft deterrence.

Organizations face a significant challenge to track the location, quantity, condition, maintenance and depreciation status of their fixed assets.

A popular approach to tracking fixed assets uses serial numbered fixed aluminium Asset Tags or fixed aluminium asset labels, which are labels often with bar codes for easy and accurate reading.
Periodically, the owner of the assets can take inventory with a mobile bar code reader and then produce a report.

The importance however lies in the durability and longivity of the assed label to remain on the asset to ensure that the asset can be identified and tracked throughout its life cycle.

APPLICATION USE

 

• Fixed asset Labelling 
• Asset maintenance recording
• Container and Pallet Tracking
• Marking warehouse bin locations
• Library shelves and library books
• Quality Control and inspection plaques
• Electrical eqiupment marking
• Metal or steel rod marking
• Machinary or tool rental / tracking

Product Details:

Label India can provide a range of Packaging Labels be whatever its size and shape and all your labelling requirements we can meet your needs.

We are able to print a range of packaging labels with various designs as per the customer requirement.

Product Details:

We specialize in offering quality Sequential Labels.

To meet exact demands of clients’, these are customized according their exact requirements. It is coated with optimum quality paper. It provides a long lasting service life and superior adhesive capacity.

Product Details:

These Distinctive Color Labels have been made from the finest Quality Raw materials available in the Market keeping in mind the Brand Value of the Product.

Our true color materials are vibrant colored labels and stickers with a permanent adhesive. The various seven colors are ideal for product labeling, organizing paperwork, addressing invitations and mail, and more.

Each of our true color materials are corresponds to colors in the Pantone Matching System (PMS).

Product Details:

This EO Sterilization Indicator Lable meets the test and performance requirements of Class I indicators for the ethylene oxide sterilization in ISO11140 and the color will be changed significantly when the sterilization conditions are met.

A visual indicator on which the inks switch colours during the sterilization process. It is used on traceability labels on boxes going through sterilization cycles.

Sterilization is an ongoing activity at hospitals, medical facilities, and device manufacturers. Making sure an item is ready and safe is critical. Indicator Labels printed with TEMPIL INK is a key component to medical sterilization packaging.

The inks are key elements of products used in many institutions globally to help provide a quick visible check that a device is ready for use.

• Hospitals & Medical Facilities
• Veterinary Hospitals & Offices
• Dental Offices
• Tattoo Parlors
• Pharmaceutical Manufacturers
• Medical Device OEMs

Sterilization Cycles:
Long Cycle: Ethylene Oxide Gas 600 mg/l concentration at 130°F/54°C for 20 minutes

Short Cycle: Ethylene Oxide Gas 600 mg/l concentration at 99°F/37°C for 25 minutes

Product Details:

We are renowned firm developing finest grade Removable Labels.

It is availble in Paper as well as Non Tearable film Material....

Special Engineered Adhesive is used.....

Product Details:

Label India provides its customers cost effective variety of Labels.

By understanding the diverse needs and requirements of our respected clients, we are actively involved in offering a high quality Labels in the market.

The offered range is widely acknowledged by huge number of clients for its optimum quality and high durability.

Product Details:

Utilizing the most modern machinery, we bring forth utmost quality Die Cut Labels in Roll Form.

Offered Die cut labels are accessible in various sizes & colors.

These Die cut labels are made at our manufacturing unit under the observation of competent experts. Our offered Die cut labels are provided in large quantity at nominal rates.

Polyester / Chromo Paper / PP

Compatible to all Label Printer Model / Brands...

Product Details:

Tilt Indicator labels are a single-use, low-cost tip indicator that monitors goods that must remain upright. Provides indisputable evidence of tipping in excess of 80°. When used with a companion label, a Tilt Indicator reduces the incidence of damage by increasing the carrier’s awareness that the package is being monitored.

Use the Tilt Indicator with companion alert label for maximum effectiveness. “Red” Indicates that the box was tilted in excess of 65-75 degrees. This indicates mishandling.

Ideal for various types of packages, such as:

• Consumer Electronics
• Industrial Equipment
• Office Equipment
• Computer Hardware
• Electronics
• Auto and Truck Parts
• Packaging/Crating
• HVAC
• Furniture and Fixtures
• Glass
• Aerospace and Defense
• Appliances
• Energy and Utilities
• Logistics / Transport and Storage
• Scientific and Technical Instruments
• And More…

Accuracy: +/-5%

Product Details:

Pharmaceutical / Nutraceutical labels have to be the most precise and professional. Our team makes sure the labels for pharmaceuticals and vitamins are accurate and printed for exact specifications.

We work with our clients to provide the right communication on the design and type of appeal for pharmaceutical labels.

Whether you have no idea what you need or want or have a complete vision for pharmaceutical or nutraceutical labels, Label INDIA can help........

We make Labels for :

• Vitamins
• Supplements / Proteins
• Sports Nutritions
• Animal Health